Norstar integration to Option 11c ? how

[Tbrandes]

What's the best way nowdays to integrate a 0x32 keysystem to an Option 11c? They are both hanging on the wall and the customer would like to know if they can put them together.

 

[wolfi24]

You can make something primitive , but effective ,it's link ext-trunk .
I mean one analog ext of Meridian incoming in Norstar like analog Trunk , and its very cheap.


Wolfi

 

[johnpoole]

the best way i've used is t1 card to t1 card, or a line side t1 in the switch, the switch side programs just like a analog set. the norstar programs as a cot trunk. the above post will work well on a single site, just jumper a analog port from the switch to the analog trunk port of the ksu. you could use 2 digit dialing between the two with analog dig

john poole
bellsouth business
columbia,sc