I have a PC that’s not reading the A drive. I went to the BIOS to make sure it wasn't disabled, the settings were (Enabled & Disabled). When using Explorer the lights aren't coming on to indicate that it’s attempting to read from the A drive. Checked inside of box to insure power was connected. Any suggestions out there?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
