No space available to add data when adding station

[noisecode]

Getting the error "No space available to add data" when adding /duplicating a station. Here is my "disp capacity" in regards to stations:

SYSTEM CAPACITY

System
Used Available Limit
-----------------------

VOICE TERMINALS
Station Button Memory (units): 34 % 66 % 662400
Station Records: 701 1699 2400
Stations (includes BRI stations): 599 - -
Stations With Port: 500
Stations Without Port: 99
Other Stations: 102 - -
TTI Ports: 310 - -
Auto Moves Stations: 0 480 480
Administered IP SoftPhones: 18 - -
ISDN BRI Endpoint And Trunk Ports: 3 997 1000
IP Trunks (included in 'Trunk ports'): 0 0 0
Remote Office Trunks (included in 'Trunk ports'): 0 0 0
SBS Trunks (included in 'Trunk ports'): 0 100 100

Says I have 1699 stations left to use. Any idea why this maybe happening? This is a G3V11si. Thanks!

 

[SF0751]

What does your "Total Subscribed Ports" page look like?

Susan
"A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort."
- Herm Albright (1876 - 1944)

 

[noisecode]

SYSTEM CAPACITY

TOTAL SUBSCRIBED PORTS
System
Used Available Limit
-----------------------
Station and Trunk Ports: 712 96 808
SBS Stations: 0 50 50
Radio Controllers: 2 0 2
Wireless Terminals: 6 4 10
XMOBILE Stations: 0 10 10
EC500: 0
DECT: 0
PHS: 0
CONCURRENT REGISTRATION COUNTS
Currently System
Registered Available Limit
-----------------------------
IP Stations: 0 13 13
IP Attendant Consoles: 0 0 0
Remote Office Stations: 0 0 0

96 ports available.

It's a strange thing, when I try to duplicate an ipstation it will give me the error, but when I add one from scratch it does not.

 

[noisecode]

Also, throughout the capacity read-out I do not see anything even close to used up. I am not sure where this is coming from.

 

[noisecode]

I seem to have found the problem. When I try to add additional aut-msg-wt auto message waiting idicator buttons to a phone it gives me that error, so when I was trying to duplicate the station I would get the error, but if I added from scratch I would not. I do not see anything about limits for aut-msg-wt in system capacity forms, so how many is max? Any ideas? Is it possible to up this number?