Configured VoIP station for user for VPN home use on laptop. Audio is fine when the call is picked up for outbound or answered on incoming but there isn't a dial tone. I've tried checking an unchecking the local tones in the VoIP tab un de the IP Extension without any success. Any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
No Ring Tones
- Thread starter anders0n
- Start date
- Thread starter
- #3
Don't enable fast start on the extension
Delete it then add it again. Give it an ID and don't touch the other settings
Make sure the user is set to voip phone manager type
In phone manager enable voip
in the preferences now you will have and audio tab, enable fast start here
Delete it then add it again. Give it an ID and don't touch the other settings
Make sure the user is set to voip phone manager type
In phone manager enable voip
in the preferences now you will have and audio tab, enable fast start here
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question