No Parameter Statement is Found 1

[rclarke]

Could any body please shed some light on the following problem?

I wish to link two forms using the 'do form textform with stestID'

sTestID = thisform.combo1.value is declared at the top
In the init event of the second form

LPARAMETER sTestID

txttst_stest=sTestID

and it comes up with the above message both forms are modal is this correct

Any HElp Greatly appreciated

Rachel

 

[rajeevnandanmishra]

Hi,

If you had defined the LPARAMETER statement as the first statement in the init of second form, only then it can accept the parameter.

I think you should run your program in debug. So, that you will find the exact line of code which is causing a problem.

 

[rclarke]

LPARAMETER is the first Line of the Init statement

Have now run debug

and is stopping on the DO FOrm With statement have looked through all the help files and I really cannot see what I am doing wrong

 

[ramani]

When you call a FORM2 from FORM1 with parameter passing,
1.
myPassedValue = ThisForm.Combo1.Value
DO FORM form2 with myPassedValue

2.
In the seconf form...
InitEvent
PARAMETERS myReceivedValue

ThisForm.txttst_stest=myReceivedValue
or
txttst_stest=myReceivedValue
and then use txttst_stest within this event for processing.

==========================================================
[ Note....
SET UDFPARMS TO VALUE | REFERENCE

TO VALUE means that a variable be passed by value, i.e - the variable's value can be changed in the user-defined function, but the variable's original value in the calling program isn't changed.
TO REFERENCE means that a variable be passed to a user-defined function by reference. Here thee user-defined function changes the value of the passed variable, the variable's original value in the calling program is also changed.]
This shall be set in the main prg.
====================================================
Hope this helps you. ramani :-9
(Subramanian.G)
FoxAcc
ramani_g@yahoo.com

 

[ramani]

If your variable sTestId is a public variable, I suggest you use a different variable name in the secondform.. as I suggested above. ramani :-9
(Subramanian.G)
FoxAcc
ramani_g@yahoo.com