Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
No display on new D4225
- Thread starter TeleLion
- Start date
- Thread starter
- #3
Phone#1:
03 ROA309203 R3G
CAA1580026 R3U EXE
CAA1580027 R2C
CAA1580028 R2D
CAA1580029 R2B
When phone is in programming mode or self test mode everything is crystal clear, whenever you exit programming mode or self test mode, you can very hardly see and make out the writings on the LCD.
Phone#2:
03 ROA309203 R3G
CAA1580026 R3U EXE
CAA1580027 R2C
CAA1580028 R2D
CAA1580029 R2B
When phone is in programming mode or self test mode everything is crystal clear, whenever you exit programming mode or self test mode, you can very hardly see and make out the writings on the LCD.
Phone#3:
03 ROA309203 R3G
CAA1580026 R3U EXE
CAA1580027 R2C
CAA1580028 R2D
CAA1580029 R2B
With this phone even in programming and self test mode it’s very hard to make out the writings on the LCD, and when in normal mode you cant see nothing much worse the phone#1 and #2.
Notes:
-When setting the display contrast and pressing the + button the contrast goes up to a certain level after that the contrast is out (nothing is shown on the LCD), and then the – button have to be pressed the same number of times that the + button was pressed over that level.
-For Phones #1 and #2 when pressing the C button, it seems to give a burst for fraction of a second to the LCD where the contrast gets better.
White D4225 phone at the lab:
03 ROA309203 R3C
CAA1580026 R3S EXE
CAA1580027 R2C
CAA1580028 R2A2
CAA1580029 R2B
Working fine on old firmware.
White D4225 phone at the lab after trying to download all the new firmware:
03 ROA309203 R3C
CAA1580026 R3S EXE
CAA1580027 R2C
CAA1580028 R2D
CAA1580029 R2B
DOWNLOAD INFORMATION
FAULT FOUND DURING EXECUTION IN LIM 1
FAILED BPOS FAILED IND REASON
001-0-30 3 TIMEOUT FROM DTS
The white phone at the lab will not download the CAA1580026.R3U file, all the other file were downloaded to the lab phone and the phone is working fine.
03 ROA309203 R3G
CAA1580026 R3U EXE
CAA1580027 R2C
CAA1580028 R2D
CAA1580029 R2B
When phone is in programming mode or self test mode everything is crystal clear, whenever you exit programming mode or self test mode, you can very hardly see and make out the writings on the LCD.
Phone#2:
03 ROA309203 R3G
CAA1580026 R3U EXE
CAA1580027 R2C
CAA1580028 R2D
CAA1580029 R2B
When phone is in programming mode or self test mode everything is crystal clear, whenever you exit programming mode or self test mode, you can very hardly see and make out the writings on the LCD.
Phone#3:
03 ROA309203 R3G
CAA1580026 R3U EXE
CAA1580027 R2C
CAA1580028 R2D
CAA1580029 R2B
With this phone even in programming and self test mode it’s very hard to make out the writings on the LCD, and when in normal mode you cant see nothing much worse the phone#1 and #2.
Notes:
-When setting the display contrast and pressing the + button the contrast goes up to a certain level after that the contrast is out (nothing is shown on the LCD), and then the – button have to be pressed the same number of times that the + button was pressed over that level.
-For Phones #1 and #2 when pressing the C button, it seems to give a burst for fraction of a second to the LCD where the contrast gets better.
White D4225 phone at the lab:
03 ROA309203 R3C
CAA1580026 R3S EXE
CAA1580027 R2C
CAA1580028 R2A2
CAA1580029 R2B
Working fine on old firmware.
White D4225 phone at the lab after trying to download all the new firmware:
03 ROA309203 R3C
CAA1580026 R3S EXE
CAA1580027 R2C
CAA1580028 R2D
CAA1580029 R2B
DOWNLOAD INFORMATION
FAULT FOUND DURING EXECUTION IN LIM 1
FAILED BPOS FAILED IND REASON
001-0-30 3 TIMEOUT FROM DTS
The white phone at the lab will not download the CAA1580026.R3U file, all the other file were downloaded to the lab phone and the phone is working fine.
- Status
Similar threads
- Locked
- Question