newest RV082 firmware 2

[hudr]

has anyone had any experience with the new firmware for the Linksys RV082? I am currently at 1.0.7 and noticed 2.1.? is out now. Good, Bad or Indifferent? I am having some VPN issues and thought maybe this could solve them.

 

[bcastner]

There has been a lot of discussion. The absolutely best place for a question like yours is the broadbandreport.com Linksys forum:

For example:

http://www.broadbandreports.com/forum/remark,10527772~mode=flat?hilite=rv082

or, for example:

http://www.broadbandreports.com/forum/remark,10413986~mode=flat?hilite=rv082

I also very much like:

http://www.linksysinfo.org/

 

[Webmeisterus]

hudr,

To date, the latest RV082 firmware version 1.1.4 has solved all known IPSEC VPN issues for the users who post to the DSL Reports site referenced above. Of course, a new bug may be discovered and reported tomorrow. But for now, I'd say you should certainly upgrade.

Hope this helps.

 

[Webmeisterus]

There is a newer version of RV082 firmware now available, namely 1.1.5. It was posted 7/1/2004.

It's version history follows:

RV082 Firmware Revision History

v1.1.5 2004/06/19
1. In [Port Triggering] setting, allow users to configure port number as 0
2. Solve a problem that failed to transmit packets form WAN1 to DMZ port if users configured WAN2 port as DMZ. This problem occurred in v1.1.2 through v1.1.4.
3. Improve the compatibility of IPSec pass-through functionality

Pretty quick turnaround between 1.1.4 and 1.1.5!