acewarlock
Technical User
On the older i2050 softphone, when you made a call you got the the DTMF tones as you were dialing, but on the newer version you only get silence. is there any way to turn this on?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Newer i2050 phones 1
- Thread starter acewarlock
- Start date
- Status
NewTechinTown
Vendor
When you say newer... What software was it downloaded from?
NewTechinTown
Vendor
Also is your computer behind a firewall or on the network?
-
1
- Thread starter
- #4
acewarlock
Technical User
Older version 1.4.0 build 363
new version 2.00.0254
No firewall
Older i2050 when you hit keys you can hear the DTMF, just like on normal phones so you know you hit the button. With the new version there is only silence when you hit a key, so unless you look at the screen to verify that it took your key input you wouldn't know if you missed a key.
new version 2.00.0254
No firewall
Older i2050 when you hit keys you can hear the DTMF, just like on normal phones so you know you hit the button. With the new version there is only silence when you hit a key, so unless you look at the screen to verify that it took your key input you wouldn't know if you missed a key.
I checked and it doesn't look like an option on the 'new' i2050. Typically it's accessed on an IP set by pressing the Services key, selecting Telephone Options, then selecting Local Dialpad Tone. That option isn't there in the new version.
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
- Locked
- Question