Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Newbie - Upgrading phones

Status
Not open for further replies.
dovcamp

dovcamp

IS-IT--Management
Joined
Jul 3, 2004
Messages
58
Location
US
I have a partner 34d that I am taking out and replacing with a 4424LD+. I have unplugged the line that was going to the 34d from the ETR board and plugged it into the GS/LS-ID board. What else do I need to do?

Thanks,

DC
 
Sort by date Sort by votes
The 4424 has to be run off of a TDL card. It sounds like you may be plugging it into an MLX card.
 
Upvote 0 Downvote
And, unless the extensions on the TDL module have been put on a jack field, you may need to connect to a connecting block.

It just depends on how the system was installed.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

moose4me
  • Locked
  • Question Question
Partner System cordless phones
Replies
1
Views
305
teletechman
teletechman
Jim E
  • Locked
  • Question Question
Legend 7- How to dial a sNumber and have selected MLX phones all ring
Replies
2
Views
361
Jim E
Jim E
YooperKen
  • Locked
  • Question Question
Undo Phone Extension Linkage (Reset Phones)
Replies
1
Views
227
TouchToneTommy
TouchToneTommy
HPP Engines
  • Locked
  • Question Question
Avaya Partner 103G4 No Dial Tone, Losing Power to Phones
Replies
1
Views
229
budbyrd
budbyrd
billpeters
  • Locked
  • Question Question
Low voice call out on only 1 of 9 Avaya phones need help
Replies
2
Views
256
billpeters
billpeters

Part and Inventory Search

Sponsor

Back
Top