My client has cisco 770 router which dials out automatically without being prompted, even after reboot and POST.
I have tried disconnecting all pc from his network and leaving only the router OFF and then ON and after the power on self test verifies the LAN and places a call on CH1, obviuosly this is costing a bit considering it connects every 20 mins throughout hte night.. what could be wrong with the configuration, or is it possibile that its is receiving some sort of input from the Telco ?
Thanks
I have tried disconnecting all pc from his network and leaving only the router OFF and then ON and after the power on self test verifies the LAN and places a call on CH1, obviuosly this is costing a bit considering it connects every 20 mins throughout hte night.. what could be wrong with the configuration, or is it possibile that its is receiving some sort of input from the Telco ?
Thanks