Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
New SV8500 call distorted
- Thread starter beeplus3
- Start date
belevedere
Instructor
Try switching over to the standby time division side if you are redundant, and test it. It could be an INT card or a switch setting (clocking). Your post does not indicate if you have a single stack or multiple stacks. That information will point you to either SW-10 cards or CK-16/20 cards in the highway module. If you can narrow it down to a PIM, try the PC-36 cards.
ethereal112
Technical User
Is this a pure IP solution or did you install the PIR's? or PIM's as the 2400 world is concerned!
- Status
