new PRI's

[phonedude10]

I just installed some new pri's that require 10 digit dialing so for local trunks i inserted the ac thru dmi table in the rlb. the dch does not send out the inserted ac however if i direct access wih the ACOD and dial all 10 digits it sees it

 

[johnpoole]

a dmi is assigned to an rlb.. an rlb is accessed post ac or steering code.. you can not do an acod and get assign a dmi.. that's why nortel added software to the switch..

add either npa's/nxx's or steering codes.. point those to a rlb assign the dmi to the rlb..

john poole
bellsouth business
columbia,sc