I have installed a second disk in a server as the original one is full. I now need to be able to use that disk and the data that is to be put on it will form part of the current web site. The trouble is I havent a clue how to get the disk up and running and to act as is needed. I realise it needs to be mounted but dont know the commands - any help would be hugely appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
new disk
- Thread starter phild1
- Start date
phild1,
The best place to start is with the manpage for the mount command.
Wishdiak
A+, Network+, Security+, MCSE: Security 2003
The best place to start is with the manpage for the mount command.
Wishdiak
A+, Network+, Security+, MCSE: Security 2003
ManagerJay
IS-IT--Management
Before using the disk, if I remember correctly, you will have to run FDISK and disklabel on the drive to prepare it for use. I do not know how to run these from the command line, as I have always run them from sysinstall.
sysinstall should allow you to select the new drive.
Jay
sysinstall should allow you to select the new drive.
Jay
- Status
Similar threads