Networking Problem

[markman42]

Have a web server, it has two ethers. One IP is set a public address the other is set to a private IP.The server is running DNS and I have SunScreen fire wall software installed. I have a cisco 675 router and is the default router. I want to put my other machines behind the firewall and assigned them a private networking IP. Not using DHCP at this piont. I have a 3m superstack switch which every thing is being connected to the one switch including the router. I have tried to set up a static and dynamic NAT rule between the private and the public network and assigned NT box a private IP. Nothing I do is working. The OS is Solaris 7 on the server.

I would appreciate any help I can get in finishing my set-up

Mark

 

[ayjaycee]

If I understand correctly (always in doubt!), your public ethernet card should connect directly to the router (via a cross-over cable, if necessary) and the private ethernet card should connect to the switch. Everthing else should also connect to the switch & have an IP address from your provate address range, with the Sun firewall as their default gateway.

HTH. TandA

http://www.tanda.f2s.com

One by one, the penguins steal my sanity.

 

[markman42]

That makes sense and is the only thing I haven't tried.
Thanks for the reply and I will surely let you know what happens.

Mark