Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Network setup

Status
Not open for further replies.

markman42

IS-IT--Management
Aug 24, 2001
15
US
Have a Sun web server, it has two ethers. One IP is set a public address the other is set to a private IP.The server is running DNS and I have SunScreen firewall software installed. I have a cisco 675 router and is the default router. I want to put my other machines behind the firewall and assigned them a private networking IP. Not using DHCP at this piont. I have a 3m superstack switch which every thing is being connected to the one switch including the router. I have tried to set up a static and dynamic NAT rule between the private and the public network and assigned NT box a private IP. Nothing I do is working. The OS is Solaris 7 on the server.

I would appreciate any help I can get in finishing my set-up

Mark
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top