Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Network Connection limit 1
- Thread starter speaks
- Start date
-
1
- #2
butchrecon
MIS
There is no way to raise the limit from the max of 10 users however, you can make the autodisconnect lower to free up connections faster. The default is 15 Minutes. So if someone is in Idle with a connection open the system will deisconnect automatically at 15 minutes. Lowering that can free them faster. Lowering the AutoDisconnect time can help to reduce some of the problems users may encounter with the 10-connection limit on a system that is not used heavily for server purposes. You can configure the AutoDisconnect time by running the following command from a command prompt:
net config server /autodisconnect:time_before_autodisconnect
Where :time_before_autodisconnect is the time you want for disconnect. I usually set My workstations to 5 minutes.
Let me know if this helps. James Collins
Field Service Engineer
A+, MCP
email: butchrecon@skyenet.net
Please let us (Tek-tips members) know if the solutions we provide are helpful to you. Not only do they help you but they may help others.
net config server /autodisconnect:time_before_autodisconnect
Where :time_before_autodisconnect is the time you want for disconnect. I usually set My workstations to 5 minutes.
Let me know if this helps. James Collins
Field Service Engineer
A+, MCP
email: butchrecon@skyenet.net
Please let us (Tek-tips members) know if the solutions we provide are helpful to you. Not only do they help you but they may help others.
- Status
