Need to use 1 in CDP DSC (SPRE issue?) 2

[McGruff753]

We have run out of DID's 2-9 to the other offices and have now encroached into the 1's. When I do a LUDN for 1's, I get nothing. When I PRT DNB for 1's, I get:

REQ: prt
TYPE: dnb
CUST 0
DN 1
DATE
PAGE
DES

DN 1
TYPE SFP

I need to be able to program 1800-1899 as a CDP DSC. Is this a possibility or am I scr@wed. I was told by corporate I may need to move my SPRE. Never played with SPRE before so I'm unclear on what steps to take.

System is an Option 11 on Succession 3.0.

 

[johnpoole]

ld 15 to change the spree code, i use a 4 digit code for the same reason,

SCH0099 TR?
TYPE: ftr

TYPE FTR_DATA
CUST 0
OPT
DGRP
IRNG
PKND
DNDL
[COLOR=red]SPRE 8765 [/color]

john poole
bellsouth business
columbia,sc

 

[McGruff753]

Thanks John. I'm not real clear on what SPRE is. I won't have to worry about any other programming or features if I make the change?

 

[janaya]

the SPRE is a Flexible Feature Code.

you would dial the SPRE number plus a corresponding code that would translate to certain features. I have used them on analog ACD phones, but ususally digital phones allow you to program buttons so you don't need it.

You do use it to log into the Maintenance phone and test LEDs on old QSU phones, and also to direct select trunks to troubleshoot.

John

 

[johnpoole]

people you use features on analog phones will notice the change, you need to make the end users aware of the change. most networks have a spree code for all sites, mine is 1111, so i only waste 1 did

john poole
bellsouth business
columbia,sc

 

[McGruff753]

Okay, so I used to dial 191***## to get into the maintenance phone. After I change SPRE from 1 to 1111, I would dial 111191***## instead?

 

[johnpoole]

correct

john poole
bellsouth business
columbia,sc

 

[McGruff753]

Thanks. You guys rock.

 

[johnpoole]

if you need help with the cdp let us know

john poole
bellsouth business
columbia,sc