Need to send 911 calls from 3 different buildings

[PhoneFixer]

The setup:
Buildings A & B phones connect to Opt 11c in Building C.
Offices in Building A, B & C use the Opt 11c for calling. All are Customer 0. Normal calls go out via a T1 to a Opt 81c at another location.
For 911 calls: Local CO lines in Building C are used. (There are 6 CO lines)
Problem: I need to have 911 calls for Building A, B & C use seperate CO lines for 911 calls so the address of caller is displayed for the 911 Center. They currently all use any one of the available CO Lines.

 

[PERRYPJ]

USE THE TARG-TGAR OPTION

OLD ROLMEN WORKING ON NORTELS

 

[johnpoole]

that is the best way to go.. you can't use ncos but tgar or tennant service works.. if you use clid (pri) you can use that a lot faster

john poole
bellsouth business
columbia,sc