Need some help adding a WIC to a 2621 router

[johnnymc]

Hi,
I currently have a 2621 router with one double wic card installed and two T1's running from it to my remote offices. The relevent part of the config is:

controller T1 0/0
framing esf
linecode b8zs
channel-group 0 timeslots 1-24 speed 64
!
controller T1 0/1
framing esf
linecode b8zs
channel-group 0 timeslots 1-24 speed 64

interface Serial0/0:0
ip address 172.16.50.1 255.255.255.0

interface Serial0/1:0
bandwidth 1544
ip address 192.168.85.2 255.255.255.0


I need to bring on another remote site so I installed another wic card in the unused slot. When I went through the documentation in the manual my new interface looked like this:

interface Serial0/2
ip address 172.16.40.1 255.255.255.0
service-module framing esf
timeslots 1-24 speed 64

Since it looked totally different I removed the interface. Can anyone tell me how to add this wic and set it up like the other one where the controller and the line info is listed separately?
Thanks for all your help!

 

[baddos]

If you get another double t1 wic it will look like that.

 

[johnnymc]

I see now that the double card has controllers listed and the single card does not. My new T1 is not installed yet so I guess I'll have to wait to see if this single card will work with what I've put in.
Thanks