Need help setting up W2K VPN through Linksys

[shigenobuchan]

Here is my network. Have a Linksys Firewall and with a W2K Domain. I'm trying to configure the VPN. Active Directory is installed on the Server. I'm trying to configure RRAS and need to know what ports to forward through the router. I don't care if I use PPTP or L2TP. How do I do this? I enabled Routing and Remote Access on the server...do i need to control access for users via AD? Help Please...sorry if i didn't give enough detail....

 

[ChicagoTechNet]

quoted from

http://www.ms-mvps.com/

Which ports need to be opened for running VPN

A: PPTP VPN uses TCP Port 1723, IP Protocol 47 (GRE); L2TP: UDP Port 1701; IPSec: Pass IP protocol 50 and 51. Note: 47 is a protocol number and not TCP port. The protocol name is GRE. It'll make a big difference when configuring your firewall or router.


Robert Lin, MS-MVP, MCSE & CNE
Windows, Network, Internet, VPN, Routing and How to at

http://www.ms-mvps.com