Need help Mapping Ports

[MrIPO]

For SIP reasons I need to Map a Range of RTP ports to a Private IP Address.

Only my Home linksys Router this is easy.

I need to now do the same on a 12.2 ISO

Currently I have this one to one map for SIP 5060

ip nat inside source static udp 10.0.7.1 5060 interface ATM0/0/0.1 5060

However I need to map UDP ports 49152 through 53246 to 10.0.7.1

How do I do a range of Ports to 10.0.7.1 ???

 

[Minue]

Hello
Did you solve your problem?If not let me know.

Regards

 

[technicaluser4]

Hi Minue,

I have the same issue here. I need to forward a port range.
How can I do this in Cisco IOS please?

Thanks!

 

[StaplesMan]

See...

http://www.tek-tips.com/viewthread.cfm?qid=1584254&page=1

CCNA, A+, HP Certified Professional