Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need a sample PRI 5ESS Call by Call trunk config

Status
Not open for further replies.
TimGMan

TimGMan

Vendor
Joined
Mar 10, 2004
Messages
22
Location
US
Hey all,

It's been many years since I have needed to set up an IP Office for a 5ESS AT&T Call by Call circuit, but I have one coming up and I can't find and old config to look at. Does anyone have a config you would mind sending along?

Thanks in advance!
 
Status
Not open for further replies.

Similar threads

V
  • Locked
  • Question Question
PRI ISDN call connect failure, after ringing
Replies
3
Views
436
IPOriface
IPOriface
JM2009
  • Locked
  • Question Question
IPO500 call forward no answer in hunt group from a analog trunk line
Replies
6
Views
850
JM2009
JM2009
DiyFrea
  • Locked
  • Question Question
ACCS Outbound - Initiate a Call with a Customer
Replies
0
Views
245
DiyFrea
DiyFrea
OldSchool70
  • Locked
  • Question Question
Call Recording
Replies
8
Views
996
Menniss
Menniss
rcc1000
  • Locked
  • Question Question
Call Record SCN
Replies
9
Views
2K
rcc1000
rcc1000

Part and Inventory Search

Sponsor

Back
Top