Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC SL2100 Individual Trunk Access Code 1
- Thread starter testman1
- Start date
-
1
- #2
belevedere
Instructor
No, if you wanted to use 8 to get a different trunk group then you can do the following:
11-01- 8=1
11-09-02 = 8
14-05 put some trunks in route 2
Dial 8, 21-15 put extensions into route table 2
The default individual trunk access code is #9. Dial #9+001,002,003 etc for individual trunks. #9 is found in 11-12-15.
11-01- 8=1
11-09-02 = 8
14-05 put some trunks in route 2
Dial 8, 21-15 put extensions into route table 2
The default individual trunk access code is #9. Dial #9+001,002,003 etc for individual trunks. #9 is found in 11-12-15.
- Status