Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC IPS 2000 "Headset Key"
- Thread starter lcns
- Start date
get into moc mode. (Trf, conf, *, Trf, conf, #)
CMD 9000 DE
xxxx,yy DE (where xxxx is the extension number, yy is the button number. also make sure you put the comma in, using the trf button)
F1090 execute.
the display should read
9000>xxxx,yy>f1090
then press execute and you will get
OK
Regards,
Dr VuDu
CMD 9000 DE
xxxx,yy DE (where xxxx is the extension number, yy is the button number. also make sure you put the comma in, using the trf button)
F1090 execute.
the display should read
9000>xxxx,yy>f1090
then press execute and you will get
OK
Regards,
Dr VuDu
OzzieGeorge
Programmer
- Status