Hi All,
I am having the following setup,
Fa0/1 172.18.121.1 Eth 0 130.1.1.20
R1-------------------------R2----
| fa0/0 172.18.121.2
|
130.1.0.0/16
R1-cisco 2600 which is an internet router
R2-cisco 1751 which I am using for accessing perticular set of servers whose ips are 130.1.111.11 to 16 255.255.0.0
Sinario:I want to give access to the telnet to R2 from internet.For this,I am nating a global ip to the fast ethernet 172.18.121.2 of the router R2.Once I do the nating,I could not ping the global ip.But when I nat the same global ip to fast ethernet 172.18.121.1 of the R1 I can ping and telnet.I tried a static route,
ip route 172.18.121.2 255.255.255.255 172.18.121.1 still I am not able to reach the fast ethernet of R2.
Is there any way I can reach fa0/0 of R2?
Pls help.
netlife.
I am having the following setup,
Fa0/1 172.18.121.1 Eth 0 130.1.1.20
R1-------------------------R2----
| fa0/0 172.18.121.2
|
130.1.0.0/16
R1-cisco 2600 which is an internet router
R2-cisco 1751 which I am using for accessing perticular set of servers whose ips are 130.1.111.11 to 16 255.255.0.0
Sinario:I want to give access to the telnet to R2 from internet.For this,I am nating a global ip to the fast ethernet 172.18.121.2 of the router R2.Once I do the nating,I could not ping the global ip.But when I nat the same global ip to fast ethernet 172.18.121.1 of the R1 I can ping and telnet.I tried a static route,
ip route 172.18.121.2 255.255.255.255 172.18.121.1 still I am not able to reach the fast ethernet of R2.
Is there any way I can reach fa0/0 of R2?
Pls help.
netlife.