ImpetusEra
Technical User
What I have is a NETBuilder 221 with 224 10.1 software running. Is it possible to take a hub and plug a cable modem into it along with a few computers and the router and share the connection using NAT?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NAT setup on NB224
- Thread starter ImpetusEra
- Start date
- Status
Hi, ImpetusEra
Yes it is possible but your uplink should be placed on WAN port - you have real IP on WAN interface and all stations will be placed behind NAT/Firewall with private IP addresses.
192.168.1.x/24 80.55.192.2/30
<eth 3com> <-- NAT --> (wan 3com>
It is quite simple to prepare - look at doc files
Brat
Yes it is possible but your uplink should be placed on WAN port - you have real IP on WAN interface and all stations will be placed behind NAT/Firewall with private IP addresses.
192.168.1.x/24 80.55.192.2/30
<eth 3com> <-- NAT --> (wan 3com>
It is quite simple to prepare - look at doc files
Brat
- Status
Similar threads
- Locked
- Question