NAT joing two networks

[mdmazero]

Ok, Heres what i've got to do. Use my 2000 Advanced Server to join my private lan, to a wireless lan {which I have no control over}

The private lan consists of a static addressing of 192.168.1.0 un-subneted, the wireless lan is addressed dynamicaly using mainly 192.233.250.0 un-subneted aswell.

I need my 2k server machine to do all of the following:

Provide internet access for 3 machines on my "private lan" {through the wireless NIC}

Provide a range of custom ports to those 3 machines on my private lan. -including local web traffic {port 80} apache on my linux box. -ports 27015 & such

Allow my private network to browse the "wireless" lan ie- network neighborhood.

Now, heres the fun part - I've used the RRAS mmc & the many options available, such as -internet connection, manual router, & network router. I'm guessing "network router" will work the best for what I need, but I'm not sure.

Installed RRAS & DNS but have had little success, ICS will not work for what I need to do because of its automatic addressing. ie-{192.168.0.1}

Question 1: Which RRAS option do i need to be using? -obviously I'll need NAT available.

Question 2: How would I open the custom port range for my "private lan" -i've messed around with the whole application, & services portion of RRAS -no luck

Question 3: What DNS information do the machines on my "private lan" need to accomplish these things?

Question 4: Have I gone about this in the bestway? I'd like to use the NAT/RRAS option available to me, i've used programs such as sygate & winproxy but have had no luck.


Any information would be very much appreciated, i've been pulling hair out over this one, thanks in advance