NARS re-routing NPA NXX 2

[wakeboardTX]

I am trying to redirect callers who dial 9+713+207+xxxx over our private tieline network using NARS software. I have attempted to do this using SPN routing but cannot as I am limited to a 4 digit entry (ie. 7132). If I program the NPA and NXX separately, how do I ensure that the redirection will occur for this NPA only? I am in a 10 digit dialing area code with an Option 11C at rls 24.24.

 

[srmega41]

Use spaces to seperate your entries. I have done this for up to 10 digits, and if I remember correctly, I had to input the numbers with spaces in place of dashes. The SPN table should take all 6, just seperate the NPA and NXX.

So,

SPN 713 207, then enter should work.

Hope this helps, and I hope I am remembering this correctly.

Scott M.

 

[johnpoole]

by adding all the numbers in that npa. here is an entry from my npa

N073

NPA 1803 449

NPA 1803 449
RLI 2
SDRR NONE
ITEI NONE

but in that case i have all the possible enrties for the 1803.. my area code is broken down into local ld and extended area so i had to delete the 1803 for some calls and put it on the local, as well as add the nxx for other calls insert the 1803 and put it on the local... some locals (extended area) are 10 digit but are billed as local.

for your app, look at the sdrr, i would use the arrn.

john poole
bellsouth business
columbia,sc