Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NAM question

Status
Not open for further replies.
jsaad

jsaad

IS-IT--Management
Jun 20, 2002
1,420
US
I have a copper NAM on a MICS. On the reception desk there is a 7324 with CAP. One of the CAP dss keys is the main dn of the NAM.

In the evening when the receptionist puts the business into closed status (via F982), often times she sees that DSS button lit as if it is busy and she cannot 'close' the business at that moment.

It is a 8 channel nam, so I don't see how 1 channel being busy would prevent her from 'closing' the business.

Would a reboot be in order?
 
Sort by date Sort by votes
Check your lines to see if they are all set for Disconnect supervision.
 
Upvote 0 Downvote
yes, you are correct, it could be that all 8 channels are in use, i don't have a dss busy lamp for every voicemail channel. but if all busy i suppose that would prevent f982 from working. It is unlikely, there are only 6 lines, and 20 telephones.

Perhaps lines aren't set for supervision and they are tying up the voicemail! that is a possibility too!

F943 opens up the ACCESS ADMIN for some reason. took a while to find that!
 
Upvote 0 Downvote
You can put all the B1 & B2 as dss/blf keys to help troubleshoot.

Would give you a status, could be always the same port or channel that is the problem.
 
Upvote 0 Downvote
F943 opens up the ACCESS ADMIN for some reason. took a while to find that! "

I bet lol

If she is closing the business is it safe to say human answers during day?

I suggest monitor F943 when call volume seems high, just sit and watch the C's.




=----(((((((((()----=
curlycord
 
Upvote 0 Downvote
Went to the site. It is a 4 channel nam, not 8.

I saw 4 dots under ADMIN but only 1 channel would work. Checked the 2 jacks feeding the voicemail and voila, one was loose. But they should have at least had 2 channels, but now they get 4 channels.

we'll see if that works. I am hesitant to reboot, it's a bit old.

thanks for all your input.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jason_l_sherman
  • Locked
  • Question
Nortel phone question
Replies
2
Views
404
jason_l_sherman
jason_l_sherman
telllman
  • Locked
  • Question
Flash 2 Nortel Question
Replies
6
Views
477
curlycord
curlycord
jsaad
  • Locked
  • Question
CICS Call Pilot multi mailbox question 1
Replies
3
Views
319
jsaad
jsaad
MontrealSoft
  • Locked
  • Question
External call transfer questions
Replies
9
Views
770
MontrealSoft
MontrealSoft
telllman
  • Locked
  • Question
NORTEL 6X16 C6 QUESTION
Replies
10
Views
624
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top