himdp,
Sorry for the delay in responding.
Thanks very much for the suggestion. Unfortunately i had no luck with this and still have problems with other lims time.
I tried this since your suggestion...
• In YAST, removed Lim1’s IP address from the NTP config (on lim2)
• Set the time manually using the ‘date’ command.
• Re-configure the IP address of lim1 in lim YAST – NTP config.
• Stop Ntp daemon and re-synch then start NTP.
Didnt work either. Other Lims remain out by a few mins.
Any other suggestions?
Cheers,
Saf.