I have an Aria 250 with 2616 DMID attached to an OPT 81c Succ3.0. I send MWI to remotes over leased PRI voice - NO PROBLEM. I am now trying to send MWI over an IP T1 DCH. When I leave a message in a box - no light. When I MIC/MCK NO PROBLEM. What would be different between Octel using the MIC/MCK & my 2616 desk set using the MIC/MCK?? When I use DCH MSGO/MSGi the messages are identical. Cisco boxes in between. Voice & CPND travel with out issues.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MWI - MIC/MCK vs OCTEL
- Thread starter mojoagogo
- Start date
- Thread starter
- #3
DAMN YOU QSIG!! That seems to come up more than I like.
The Octel and Opt 81 are connected with 5 MWI ports. 25 pr off Octel to frame. 2616 configed w/MIC-MCK crosswired from 81c to the amp. Once MWI hits OPT 81 we PRI it to a Cisco 3700. RCAP is MWI & ND2
The Octel and Opt 81 are connected with 5 MWI ports. 25 pr off Octel to frame. 2616 configed w/MIC-MCK crosswired from 81c to the amp. Once MWI hits OPT 81 we PRI it to a Cisco 3700. RCAP is MWI & ND2
- Status
Similar threads
