Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MultiTechRas/Cisco/Server2000 - help!

Status
Not open for further replies.
jhowley58

jhowley58

Programmer
Jun 25, 2001
207
US
Hi,

I dial into a server via a multitech RAS finder connected to a cisco 801 router.

Just recently the following problem seems to be occuring:

I dial in and it seems to connect to the LAN OK - mostly at 26.4 kbits but sometimes at 28.8 kbits. But when I try to link to the actual server I get a message saying that the server cannot be reached etc. When it was working OK the connection speed was over 30 kbits/sec.

Anybody got any ideas?

Thanks,

John.
 
Status
Not open for further replies.

Similar threads

Blackybear
  • Question
Cisco RV042G router
Replies
0
Views
281
Blackybear
Blackybear
Jared R
  • Locked
  • Question
Cisco UC320W Paging Help
Replies
0
Views
667
Jared R
Jared R
B
  • Locked
  • Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
370
badwolf1686
B
pbxcomm
  • Locked
  • Question
CISCO VG450
Replies
1
Views
763
nt8d09
nt8d09
CPM86
  • Locked
  • Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
522
CPM86
CPM86

Part and Inventory Search

Sponsor

Back
Top