Multiple Outside and inside interfaces 1

[stooo]

Is it possible to configure 2 outside and inside interfaces to allow some switch resiliency on an ASA?

My server behind it has NIC teaming, and it connected up to 2 2960 switches, would be good if the ASA could also connect to both.

The ASA also hangs behind another pair of 2960s uplinking to HA checkpoints

Thanks

 

[brianinms]

Its why you can use 2 ASA's in Active/Active or Active/Standby failover.

 

[stooo]

Sorry, you've confused me. I only have 1 ASA, I would like that ASA to have 2 outside interfaces, and 2 inside interfaces

 

[brianinms]

You can't have an ASA with 2 outside interfaces and 2 inside interfaces. You can however have 2 ASA's in either Active/Active or Active/Standby failover. Hence with 2 ASA's you have redundancy.

 

[brianinms]

Update .... I was wrong. In 8.0 code you can have redundant interfaces.

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/intrface.html#wp1045838

 

[stooo]

ah, thats exactly what I need. thanks