Multiple numbers on WCBRI Data-Modules 3

[RKuehn]

Hi all,
i have many problem to get the following running:
I have a ISDN Fax-Server card connected to an Definity TN556 BRI Card, administered as data-Modul WCBRI. So far all works fine. But i want to get 10-15 extension numbers, which should be all redirected to the data-modul extension (for assigning 10-15 fax-mailboxes). I tried to use an x-port station with a cov path, but i was not able to enter a data-module extension in an cov-path.
So i tried to set up the fax-server extension as WCBRI station, not as data-module. With that it works fine, but the isdn fax-card is only able to use 1 B-Channel for faxing, when administered as data-modul you can use 2 !

Any idea, how to assign 10-15 number to a wcbri data-modul?

many thanks !

 

[europe]

Set the TN556 BRI Card up as a trunk board, assign a trunk and use UDP to direct calls to the trunk. Please let me know if the information that was provided is helpfull.
Edwin Plat
A.K.A. Europe

 

[sk1053]

Vanelle was kind enough to help me with setting up the trunk board and UDP as Europe suggested. See thread690-389059

 

[definityman]

I've the same problem with my Fax server on definity g3r8 but i don't use udp and my fax users are all vdn's.

Any suggestions ?


Thanks in advance