We have an Option 11 PBX with a remote expansion cabinet running on multimode fiber. We recently installed new fiber and would like to move the expansion cabinet to the new strands. Are there any recommended procedures to follow before disconnecting the existing and reconnecting to the new?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Move expansion cabinet to new fiber 1
- Thread starter Ltk2000
- Start date
-
1
- #2
i would do a disl x to disable the loop, make the swap then do a ennl x to bring it back up... both being ld 32 commands. other then taking it down and back up the loop will never know the diff.. you may want to do a ld 97 prt xpe, to make sure the xpe cpmes back up, enxp x in 32 will bring that back up, it shouldn't be necessary
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question
