Most Recent code for the 515e

[Sweetworks]

I have a Pix 515e that has been sitting around in storage since we shut down an office 2 years ago.

We are switching things around network wise and want to rebuild the new config on the 515 in storage so we are not messing around with a production firewall.

It has been awhile since I messed around with the Pix config. I wanted to make sure I had the most recent version.
I just checked and it is Version 6.3(5)

So I want to Cisco's site (Which is poorly laid out) and I can't find what the most recent version is.

Can anyone point me in the right direction.

And before anyone suggested upgrading to version 7, we don't have enough memory in the pix to upgrade to version 7 so we are staying with version 6.3x

 

[brianinms]

6.3.5 is the most recent 6 code

 

[ADB100]

If you up the memory in the PIX 515 you can run code 7.x or 8.0. You need a minimum of 64MB DRAM and 16MB Flash, however 128MB DRAM is recommended. I would go with 7.2(3).

Andy