more than one alternate address

[netwalker1]

I have Citrix in my Office with the IP : 192.168.10.16
and I have a firewall..
Citrix is natted to outside with the IP : 213.11.x.x
also it is natted to another DMZ with the IP : 172.16.x.x

how can I configure Citrix with 2 alternate addresses ??



Mohamed Farid
Know Me No Pain , No Me Know Pain !!!

 

[xs4citrix]

You need to multihome your citrix server, for a double nat (ie altaddr)

http://www.printingsupport.com

Free citrixprinting support

 

[netwalker1]

How Can I do that ?!

Mohamed Farid
Know Me No Pain , No Me Know Pain !!!

 

[netwalker1]

I already have 2 NICs :
one with the IP : 192.168.1.x and the other has the IP : 192.168.10.x

I used these 2 commands :
altaddr /set 192.168.1.x 172.16.x.x
altaddr /set 192.168.10.x 213.11.x.x

I also added another TCP listener on the Citrix Connection..

What Shall I do then !?

Mohamed Farid
Know Me No Pain , No Me Know Pain !!!

 

[xs4citrix]

- Make sure only 1 nic has a gateway configured.
- Make sure the nic with the gateway is on top of the binding order.
- Make sure each ica listener has a dedicated NIC configured in "Citrix Connection Configuration".

After that, your setup should work in theory.

http://www.printingsupport.com

Free citrixprinting support

 

[netwalker1]

what about working with Secure Gateway , with the FQDN ?

Mohamed Farid
Know Me No Pain , No Me Know Pain !!!

 

[xs4citrix]

If you bind you CSG FQDN to both your 172 and your 213 adres, were talking about DNS round robin. (asuming no hardware load balancer is in place.
A complete different approach the you were talking about so far.

Could you first try to describe what you are trying to achieve, before were going over all of this stuff?

http://www.printingsupport.com

Free citrixprinting support