Monitoring

[rlgriffin]

Is there a way to monitor a tty without that person knowing?

 

[johnpoole]

not a software one,, you can extend the rec pair of any serial for that monitor

john poole
bellsouth business
columbia,sc

 

[Johnthephoneguy]

you can use the MON command at the >MON x with x=tty port you want to watch. They won't know unless they use the >WHO command and that will show them monitor on. If they are in loads working they will have no idea you are watching.

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[GHTROUT]

The MON command outputs a line that tells the other TTY they are being monitored - here is a paste of screen text from two TTYs

TTY 10 connected via dialup, just ending a LD32 STAT then being monitored at 23:35. After that TTY 12 did a "SEND ALL" and wrote "Hello". Below this is the input that TTY12 made.

TTY10

00 DSBL 00 BUSY NPR301
063 = PRI TRK LOOP
00 DSBL 00 BUSY NPR301
.
*** MONITOR ON TTY 10 FROM TTY 12 23:35
12:**HELLO
>





TTY12 connected via direct to SDI

logi
PASS?
OVL111 IDLE 0
OVL111 TTY 10 32
TTY #12 LOGGED IN 23:34 28/11/2006

>who
PORT ID OVERLAY NAME SPRT MONITOR
TTY 10 32
TTY 12 0

>mon 10
*** MONITOR ON TTY 10 FROM TTY 12 23:35
OVL000
>
OVL000
>send all
SEND MSG: Hello
>






[highlight #CCFFFF]

http://www.GHTROUT.com

[/highlight]