Monitoring PRI Trunk

[nutek10]

I need commands to start monitoring messages on the PRI Trunk.
I have tried LD 96/ enl msgi, that does not seem to work.
Thanks for the help.

 

[viper222]

Go here.

http://www.tek-tips.com/viewthread.cfm?qid=970278&page=1

Make sure you type the D channel you want to monitor after the ENL MSGI

ENL MSGI x

 

[johnpoole]

might not want to do that during heavy traffic, real hard to turn off with a page per call setup and anothe for teardown

john poole
bellsouth business
columbia,sc