Monitoring hardware trunks etc by PRTG

[doriancosentino]

hi,

i try configure monitoring avaya ipo 500 with prtg software but not success, only can some sensors linke lan,tcp and und packet, ping only this.
i know that ipo 500 snmp is limited, but i need monitoring for example health hardware and if link down/up

someone monitors with some other software? which OIDS use ?

thanks

 

[derfloh]

If you find something out let me know. Be aware that IP500 only supports SNMPv1

 

[nnaarrnn]

agreed. It's the IP Office that's the problem, not your software.