Monitor NAM Channels with KLM? 1

[A2Xprt]

Is there a way to monitor the channels on the NAM using a 7324 w/2KLMS ? The NVM DN is 2250, so I know I could create an Internal Autodial for DN 2250...but what about the 12 channels individually? I would just like to know how many VM channels are in use at any one time.

Setup is:

MICS 6.1 (non-XC)
NAM 4.1 (12 channels, I believe)connected to switch via fiber on 6 port fiber card.
NVM DN=2250.

I have a some spare keys on a KLM that would be perfect to use to monitor the channels if possible.

Thanks!!!

 

[exsmogger]

The B1 channels should be 2250-2255. Go to maintenance - port status and put in DN 2250. It should then give you an option to see status of the B2 channel which will identify its DN. Program all 12 DN's to the KLM using F*2.

Brian Cox

http://www.jandjcommunications.com

 

[A2Xprt]

Brian, thanks for your helpful insight. I will give it a shot tonight...that's the answer I was looking for.

 

[lugerlover]

also in access you can see all channel aciviity