MOH Multicasting acrross VG

[snootalope]

Hello

I have a call manager here that has music-on-hold enabled and using multicasting as a mean of distribution.. all my ip phones ON my network can hear the hold music just fine when placed on hold, but my PROBLEM is: None of the callers from the pstn can here the music when placed on hold!

Here's my layout

PSTN---->VG200----->3550 switches------>Call Manager

Now I know the switches are probablyh irrelavant, but I just thought I'd put them on there! My call manager is using a base multicast address of 239.1.1.1, also, probably not important.. What I need to do is get that VG200 to "pass" ?? or "connect" the callers from the pstn to the multicasting..

There may be some more configuring in the call manager, but I was hoping maybe someone out there has gotten this working before..

help?
snooter

Oh yeah, my VG is NOT using MGCP either, it's only IOS version 12.2(7a).. if ya care to know.. I've tryed messing around with the MROUTE command on the vg, but it's so confusing to me..

"tis better to remain silent and be thought of as a fool..
then open your mouth and remove all doubt" Mark Twain

"I should of been a doctor.." Me

 

[snootalope]

Just thought I'd let everyone know that adding more memory and upgrading to 12.2(11)T fixed everything right away.. that ios comes with a ccm music-on-hold command that you can control multicasting to different interfaces with.. sweet..

snoots

"tis better to remain silent and be thought of as a fool..
then open your mouth and remove all doubt" Mark Twain

"I should of been a doctor.." Me