Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modify the ringing in EC500

Status
Not open for further replies.
Chrisduque

Chrisduque

Programmer
Joined
Oct 14, 2013
Messages
22
Location
GT
Hi

I have a question about the EC500 in Communication Manager, can i change the time of ringing?, for example i want the EC500 ring at the cellphone at the third ring, i dont want a coverage path because i need the advantages of EC500. In the options of user i have an option called timer but i dont know the function of this.

Thanks a lot
 
Sort by date Sort by votes
Hardware platform? Definity/CM Software version?


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
Using the Extension to Cellular timer feature
Extension to Cellular has a timer option that can be included with an
administered Extension to Cellular feature button on your office phone.
For this timer option to be available to you, all of the following conditions
must be met:
- The Enhanced Extension to Cellular feature must be enabled for your office
phone by your administrator.
and
- Your office phone supports administrable feature buttons.
and
- The timer option must be configured by your administrator.

Contact your system administrator to verify that the timer option is available
to you. When engaged, the timer disables Extension to Cellular for one hour (60
minutes). When the timer expires, Extension to Cellular is automatically
re-enabled.
Note: You can only start the Extension to Cellular timer through the
administered feature button on your office phone.
--------------------------------------------------------------------------------
Engaging the timer when Extension to Cellular is currently enabled
If Extension to Cellular is currently enabled, the lamp on your office phone
that corresponds to the administered feature button lights green.

To engage the Extension to Cellular timer when Extension to Cellular is
currently enabled:

Press the Extension to Cellular feature button.
- The lamp changes from a steady green light to a green inverted wink
(250 ms on, 750 ms off).
- The message Extension to Cellular Timer Enabled appears for two seconds on
your phone display.

Once engaged, the timer disables Extension to Cellular for one hour. At the end
of one hour, Extension to Cellular is automatically re-enabled without your
intervention.
--------------------------------------------------------------------------------
To manually shut down the Extension to Cellular timer, do one of the following:
- Press the Extension to Cellular feature button once to shut down the timer and
leave Extension to Cellular disabled.
or
- Press the Extension to Cellular feature button a second time to shut down the
timer and re-enable Extension to Cellular.
or
- Enter the Extension to Cellular enable or disable feature access code (FAC) on
your phone keypad.
--------------------------------------------------------------------------------
Engaging the timer when Extension to Cellular is currently disabled

If Extension to Cellular is currently disabled, the lamp on your office phone
that corresponds to the administered feature button is off.

To engage the Extension to Cellular timer when Extension to Cellular is
currently disabled:
Press the Extension to Cellular feature button twice.
- The lamp displays a green inverted wink (250 ms on, 750 ms off).
- The message Extension to Cellular Timer Enabled appears for two seconds on
your phone display.
To manually shut down the Extension to Cellular timer, do one of the following:
- Press the Extension to Cellular feature button once to shut down the timer and
leave Extension to Cellular disabled.
- Press the Extension to Cellular feature button a second time to shut down the
timer and re-enable Extension to Cellular.
- Enter the Extension to Cellular enable or disable feature access code (FAC) on
your phone keypad.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
Using the Extension to Cellular timer feature
Extension to Cellular has a timer option that can be included with an
administered Extension to Cellular feature button on your office phone.
For this timer option to be available to you, all of the following conditions
must be met:
- The Enhanced Extension to Cellular feature must be enabled for your office
phone by your administrator.
and
- Your office phone supports administrable feature buttons.
and
- The timer option must be configured by your administrator.

Contact your system administrator to verify that the timer option is available
to you. When engaged, the timer disables Extension to Cellular for one hour (60
minutes). When the timer expires, Extension to Cellular is automatically
re-enabled.
Note: You can only start the Extension to Cellular timer through the
administered feature button on your office phone.
--------------------------------------------------------------------------------
Engaging the timer when Extension to Cellular is currently enabled
If Extension to Cellular is currently enabled, the lamp on your office phone
that corresponds to the administered feature button lights green.

To engage the Extension to Cellular timer when Extension to Cellular is
currently enabled:

Press the Extension to Cellular feature button.
- The lamp changes from a steady green light to a green inverted wink
(250 ms on, 750 ms off).
- The message Extension to Cellular Timer Enabled appears for two seconds on
your phone display.

Once engaged, the timer disables Extension to Cellular for one hour. At the end
of one hour, Extension to Cellular is automatically re-enabled without your
intervention.
--------------------------------------------------------------------------------
To manually shut down the Extension to Cellular timer, do one of the following:
- Press the Extension to Cellular feature button once to shut down the timer and
leave Extension to Cellular disabled.
or
- Press the Extension to Cellular feature button a second time to shut down the
timer and re-enable Extension to Cellular.
or
- Enter the Extension to Cellular enable or disable feature access code (FAC) on
your phone keypad.
--------------------------------------------------------------------------------
Engaging the timer when Extension to Cellular is currently disabled

If Extension to Cellular is currently disabled, the lamp on your office phone
that corresponds to the administered feature button is off.

To engage the Extension to Cellular timer when Extension to Cellular is
currently disabled:
Press the Extension to Cellular feature button twice.
- The lamp displays a green inverted wink (250 ms on, 750 ms off).
- The message Extension to Cellular Timer Enabled appears for two seconds on
your phone display.
To manually shut down the Extension to Cellular timer, do one of the following:
- Press the Extension to Cellular feature button once to shut down the timer and
leave Extension to Cellular disabled.
- Press the Extension to Cellular feature button a second time to shut down the
timer and re-enable Extension to Cellular.
- Enter the Extension to Cellular enable or disable feature access code (FAC) on
your phone keypad.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
I will try, thank i tell you the results.

Thanks

 
Upvote 0 Downvote
I try this, but this timer is not for the number of rings, its only about the temporizer to disabled the EC500 to the extension for a one hour.
 
Upvote 0 Downvote
true. But that is an answer to one of the questions that you asked.

number of rings is controlled by the station's coverage path
and for ec500 uses system coverage-forwarding

experimenting with these will affect all coverage.

This timing allows calls not answered at the cell to be answered by the cell's voicemail
or timeout and come back to the cover path and cover to your pbx voicemail

Code: 
display system-parameters coverage-forwarding                   Page   1 of   2
                SYSTEM PARAMETERS CALL COVERAGE / CALL FORWARDING

CALL COVERAGE/FORWARDING PARAMETERS

          Local Cvg Subsequent Redirection/CFWD No Ans Interval (rings): 3
        Off-Net Cvg Subsequent Redirection/CFWD No Ans Interval (rings): 5
                          Coverage - Caller Response Interval (seconds): 3
     Threshold for Blocking Off-Net Redirection of Incoming Trunk Calls: ?



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
true. But that is an answer to one of the questions that you asked.

number of rings is controlled by the station's coverage path
and for ec500 uses system coverage-forwarding

experimenting with these will affect all coverage.

This timing allows calls not answered at the cell to be answered by the cell's voicemail
or timeout and come back to the cover path and cover to your pbx voicemail

Code: 
display system-parameters coverage-forwarding                   Page   1 of   2
                SYSTEM PARAMETERS CALL COVERAGE / CALL FORWARDING

CALL COVERAGE/FORWARDING PARAMETERS

          Local Cvg Subsequent Redirection/CFWD No Ans Interval (rings): 3
        Off-Net Cvg Subsequent Redirection/CFWD No Ans Interval (rings): 5
                          Coverage - Caller Response Interval (seconds): 3
     Threshold for Blocking Off-Net Redirection of Incoming Trunk Calls: ?



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
Thanks and on this parameters what would change to affect the EC500 to ring at the third time on the cellphone?
I want to receive the call in mi Direct number and ring three times and the four time ring in the two stations (cellphone and station)

Can CM make this? 5.2.1

thanks a lot
 
Upvote 0 Downvote
post the stations coverage path and the system coverage entries

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Upvote 0 Downvote
I can only use the Coverage the EC500 cant make this?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Joey Humphrey
  • Locked
  • Question Question
Activating EC500 from Avaya Workplace
Replies
3
Views
429
Joey Humphrey
Joey Humphrey
SouthernKnight
  • Locked
  • Question Question
Inbound EC500 not converting to Internal Extension
Replies
8
Views
1K
SouthernKnight
SouthernKnight
tthunder
  • Locked
  • Question Question
Genesys Cloud Avaya EC500 Equivalent
Replies
0
Views
387
tthunder
tthunder
M
  • Locked
  • Question Question
Avaya CM Coverage to Multiple Extensions with EC500
Replies
3
Views
746
MAZZYA
M
jjacobs83
  • Locked
  • Question Question
PBX is sending a "180 Ringing" message with an SDP
Replies
1
Views
651
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top