Modems on G700

[stlouis1]

I need a work around until the modem relay feature comes out. I need a modem on one G700 to talk to another on a second G700. I was going to make a tie trunk between the two using MM711 ports. The problem is I can't find a configuration for CO tie trunks that work on the MM711. Any ever done this?

 

[petran]

Communication for modems over IP is available with Avaya Communication Manager 2.1.1 .....

Petran.

 

[stlouis1]

I don't have the option to get off of ACM 2.0.1. My rollout started with hardware that can't support ACM 2.1 - e.g. older S8300 LSP's. Upgrades aren't in this year's budget. We've got a ton of IP endpoints now but the analog support on the G700s have really cost us a lot of time and left us wanting better performance. The limited choices on trunk types is just one of many analog port issues we've had to work around. Any suggestions?

 

[nohuhu]

stlouis1,

afaik there is no support for tie trunks on the mm711, but you can use a workaround: on the first g700, create an extension, and on the second g700, a trunk. don't forget to enable adjunct supervision in the extension form.