Need assistance with getting an external USR 56k modem working on a notification server. This server is set to dial out to a pager when network issues are discovered.
The server is running RedHat 7.2 with kernel 2.4.7-10. The modem is hooked upto com port 2. The server was working fine until I ran into a hard drive issue which lead me to format the server and reinstall the OS. Since the reinstall I've been unable to get the modem to work.
Here's what I've done so far to try to get the modem working again.
1. create softlink from /dev/ttyS1 to /dev/modem
2. configure modem via minicom to use /dev/ttyS1
3. AT command gives OK feedback on com 2
When I attempt to test modem from minicom I get error:
CONNECTION TIMEOUT. NO CARRIER
Desperate and need HELP?????
The server is running RedHat 7.2 with kernel 2.4.7-10. The modem is hooked upto com port 2. The server was working fine until I ran into a hard drive issue which lead me to format the server and reinstall the OS. Since the reinstall I've been unable to get the modem to work.
Here's what I've done so far to try to get the modem working again.
1. create softlink from /dev/ttyS1 to /dev/modem
2. configure modem via minicom to use /dev/ttyS1
3. AT command gives OK feedback on com 2
When I attempt to test modem from minicom I get error:
CONNECTION TIMEOUT. NO CARRIER
Desperate and need HELP?????