Mobile Extension Setup for Analogue CO Lines

[Phatbloke]

We have a LDK-20 and have 5 analogue incoming lines. We currently have direct lines set up using Ring Assignments in PGM144. So that the correct outgoing line is selected we set it up by restricting the groups available to a station in CO line group in PGM117.

My question is, is this the right method or can DID be set up as per this thread using analogue lines

http://www.tek-tips.com/viewthread.cfm?qid=1490511

The problem is we cannot get modbile extensions working so that a users mobile will ring if the station isn't answered. Is there an alternative way to achieve this?

Thanks

 

[doktor]

With analogue PSTN lines, you cannot use the PRI progrmming as it is only for ISDN lines.
My advice will be to swap from analogue lines to ISDN2 (BRA).
With this swap, you will enjoy more flexibility.

///doktor