MM 5.2 SIP password on autodial button

[Spookytooth]

Hello folks,

I have an issue after migrating a customer from MM 3.1 w/ Qsig to MM 5.2 w/ SIP. On the 3.1 system the customer had several extensions set up with autodial buttons to check a general mailbox. The string is as follows -

(vm hunt group)5000~p~p*#5555(mailbox)

The 5.2 is ignoring any digits past 5000 and prompting for the local users password.

Any one run into this before?

Thanks in advance!