Mitel 3300 Major Alarms

[rainraingoaway]

I have 3 Major Alarms and was wondering how to clear them and why they were generated.

Category Alarm Total Unav- Minor Major Critical Threshold
Name Level ailable

Lines Major 1417 22 10 20 40
Per msg link Major 5 20 - >0 100
Receivers Major 108 11 >0 25 100

Please Help!

 

[LoopyLou]

The lines is that the system thinks it has a bunch of phones out of service. The per msg link is the system thinks it has a bunch of peripheral nodes off a SX2000 and it can't see them. The receivers are also related to what it thinks it has in the peripheral cabinets. So if you had and no longer have per node remove the programming and if that doesn't clear it try a reboot and if that doesn't clear it a save and restore might once all the programming is removed.

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

 

[rainraingoaway]

how do I remove the programming??

 

[Waldosworld]

Did someone unplug or turn off power to per cabinets by mistake or are you downsizing?
22% of your phones are out of service!

 

[LoopyLou]

you go into the necessary forms and remove the data.

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.