Minor alarm

[calhoony]

We have S8730 pair with the following software version

The Software Version Web page displays the software version of the active partition of this server.

Operating system: Linux 2.6.18-53.AV17PAE i686 athlon
Built: Mar 31 22:21 2009

Contains: 02.0.947.3
CM Reports as: R015x.02.0.947.3
CM Release String: S8730-015-02.0.947.3

UPDATES:
Update ID Status Type Update description
------------------------------- ------------ ------- ---------------------------
02.0.947.3-17534 unpacked cold patch 17534 for 02.0.947.3
02.0.947.3-17579 activated cold patch 17579 for 02.0.947.3

Platform/Security ID Status Type Update description
------------------------------- ------------ ------- ---------------------------


CM Translation Saved: 2010-01-07 02:15:22

CM License Installed: 2009-10-21 14:45:10

CM Memory Config: Extra Large



A Couple of weeks ago I got the following minor alarm on one of our G650 port networks. This had been in service for 4+ years.

ALARM REPORT

Port Mtce On Alt Alarm Svc Ack? Date Date
Name Brd? Name Type State 1 2 Alarmed Resolved

10minor EXT-DEV n unknown MINOR y 12/22/19:02 00/00/00:00

We had not made any changes in this port network to cause an eda alarm but it is showing one... I can't get rid of it. Any ideas? I have tried everything short of rebooting the port network. It has a lot of CLAN's that has 1000 ip phones registerd to them...

 

[AvayaTier3]

Defective tn775 in cabinet 10 or short on the contact closure leads of the aux cable in cabinet 10 would be a good place to start.

Maybe unplug the aux and swap the tn775 with a different cabinet and see if the trouble moves.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[calhoony]

port network 10 is a G650 pair, Avaya put it in 2-3 years ago for us. Was center stage attached, not ipsi. Didn't have a maintenance board even installed. We put a Tn771 in just to see if that would clear the alarm and it didn't. do have ipsi's in this port network now, so maybe the adapter which has the external alarm connector(db9) may be bad...???