midnight routines with fiber remote

[Romar53]

Hey guys,
I have an CS1000E,rel 4.5. When the Midnight routine runs it does not disable phones that are unplugged on loops that are in a fiber remote. Here is what the midnight look like:

OVLY
SID 298
BKGD 044
PBXH X
TODR 01
DROL 030 034 036 038 045 060 135 137
MID_SCPU NO
MULTI_USER ON

The Fiber remote equipment is TSI - Fiber Remote Multi-IPE

 

[GHTROUT]

Look for CLS FLXA in the TNs - if it's there, they won't disable.

They do disable on the many Carrier Remotes I have - not sure about fiber




~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[Romar53]

Thanks GH! Checked the CLS it is FLXD. Should I be running LD 33 in the MIDs?

 

[Reusser]

what if you run the test manually -

LD 30
.LOOP xx <-- xx is the fiber remote loop number

 

[GHTROUT]

No need for 33 - that's "old" RPE.

There is no specific overlay to run in Mids for Carrier or Fiber Remote.


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]